手机签到经验翻倍！
分享到：
| 发表于 2008-12-08 09:31:03 楼主 | |
|
进入工厂模式可以测试自动对焦，快门，ISO，色彩，AV等总共十五项相机性能，有兴趣的机友可以试试，进入方法：
1. 将模式转盘调到程序模式，也就是将转盘调到“P”档。
2. 同时按住方向键“↑”和机顶的“AF微距”键不动，然后开机。 (注意点：开机时，方向键“↑”和机顶的“AF微距”键必须同时按住不放)
3. 切换到“回放”模式，然后再同时按下方向键“↑”和机顶的“AF微距”键，随即会听到"嘀"的一声响，再切换回"P"档，放开刚才同时按住的两个键。 (注意点：切换到“P”档或者“回放”档时，方向键“↑”和机顶的“AF微距”键必须同时按住不放。如果你没有听到"嘀"的一声响，可能是你将相机的声音设置关闭了。)
4. 同时按住“MENU”键和方向键“→”，然后关机，即可调出FZ18隐藏的语言设置页面。 (注意点：关机时“MENU”键和方向键“→”必须同时按住不放，由于“MENU”键和方向键"→"靠得太近不好同时操作，可以先按住方向键“→”不放，再按住“MENU”键不放，然后关机，这样简单有效。)
5. 正确设置完关机应出现“INITIAL SETTINGS ”选项。在设置页面里有多种语言可选，如果是水货就可以选GK，这个前面已经有大虾说过了，在这不多阐述，只说怎么进入工厂模式，此时，按“MENU”键就退出了，然后，就是最关键的一步，同时按住“MENU”键和机顶的“AF微距”键不动，然后开机。 (注意点：开机时，“MENU”键和机顶的“AF微距”键必须同时按住不放) ，这是就可以进入工厂模式！！！
关于固件升级：笔者在国外的网站上找到了1.08的固件，有兴趣地可以看看 1.08* Improved horizontal noise, in starry sky scene mode / manual exposure mode. *改进的噪音水平，在星空场景模式/手动曝光模式。(The noise may appear when shutter speed is set to around 15 sec. by the camera.) （噪音时可能会出现快门速度设定在大约15秒。由相机。 ）1.07* Improved blue band may appear on a picture taken slightly and *改进的蓝色带可能出现在图片采取小幅和need three components change on the MAIN PCB. 需要改变三个组成部分的主要电路板。1.06* Improved detecting speed faster for the face detection. *改进的检测速度更快的人脸检测。* Improved AWB function. *提高小麦的功能。* Improved the date information may not correctly printed (PictBridge). *改进的最新资料，可能无法正确打印（照片） 。* Improved detecting time faster for the face detection. 1.05*改进的检测时间更快的人脸检测。* Improved an over ISO sensitivity gain. *改进了对ISO感光度收益。* Improved out of focus at 1m, in the tele-macro mode. *改进的重点放在100万，在远程宏观调控模式。 以下是固件升级的说明，英文好的可以看看[ Firmware version up procedure for DMC-FZ18 ]The firmware update procedure is as follows:1. Confirm the firmware version currently installed in the camera.2. Download the latest firmware available for the camera from TSN-PAVC Web site.3. Copy the downloaded and decompressed file into an SD Memory Card.4. Update the camera by using the SD Memory Card.5. Confirm the firmware version.< 1. Confirm the firmware version currently installed in the camera. >1) Turn the "Camera ON/OFF Switch" OFF.2) Insert a battery with sufficient power and connect the AC Adapter. (DMW-AC7: Optional)3) Insert an "SD Memory Card" with some pictures.4) Set the mode dial to "Program AE mode".5) While keep pressing "AF macro/Focus Switch Button" and "Upper arrow Cursor Button" simultaneously, turn the "Camera ON/OFF Switch" ON.6) Set the mode dial to "Playback mode".7) After pressing "AF macro/Focus Switch Button" and "Down arrow Cursor Button" simultaneously, the LCD monitor will display the following data.Note:The data will not appear if the LCD monitor is not set to Normal display. Press "[DISPLAY/LCD MODE] Button" to change the LCD display mode.8) Press "AF macro/Focus Switch Button" and "Down arrow Cursor Button" simultaneously to go back to normal indication mode.< 2. Download the latest firmware available for the camera from TSN-PAVC Web site >1) Connect your PC to TSN-PAVC web site and download the firmware and save it to your PC.2) Usually the firmware is zipped. Decompress the firmware to have "FZ18_x.bin" file format.< 3. Copy the downloaded and decompressed file into an SD Memory Card >1) Copy the downloaded and decompressed firmware file into the root directory ofan SD Memory Card that has at least 8 MB of free space. The card should alsohave a few photos on it.Note:1. Sample of a file name: The name of firmware is "FZ18_x.bin".( "x" is different according to the firmware version.)2. If the PC does not have an SD slot, connect camera body unit to the PC with USB cable.Insert an SD Memory card to the camera body unit and copy the file.Remove the USB cable from the PC and the camera body unit.Copy the firmware on the rootdirectory positiion.This part is confirmed.(This sample display image is firmware version ”1.04”.)评分：+Z金豆 1 已有 1人参与评分 |
|
|
个性签名：无
|
| 发表于 2008-12-08 14:38:02 1楼 | |
| 有危险，还是等高人刷好有经验再教教咱们吧 | |
针对ZOL星空(中国)您有任何使用问题和建议 您可以 联系星空(中国)管理员 、 查看帮助 或 给我提意见
