台湾星空(中国) 造福超频众的软件

AMD处理器调试工具AmdMsrTweaker发布新版
XtremeSystems星空(中国)网友MarcusBSN的接管了AmdMsrTweaker的开发,现在发布了新版本.

提供了Trinity,Richiland APU的支持,并预支持了Kaveri APU.

这个工具主要用于调整AMD Cool'n'Quiet的倍频跟电压或者AMD Turbo Core的最大倍频跟电压等等.以下是说明文.

Quick guide: I'm too lazy to write a complete guide just now, so please take a look at the following examples:
AmdMsrTweaker
=> no parameters: info
AmdMsrTweaker P0=12.5@1.4 P2=8 P3=@0.85
=> modifies P0 (multi=12.5, VID=1.4V), P2 (multi=8) and P3 (VID=0.85V)
AmdMsrTweaker P2
=> switches to P2 (note: if C&Q is enabled, the cores are likely to switch very soon to another P-state, so this makes only sense if C&Q is disabled or if the high-performance power-profile is active)
AmdMsrTweaker Turbo=0
=> disables the turbo (use 1 to enable it)
AmdMsrTweaker APM=0
=> disables Application Power Management (TDP limiting) for Bulldozer (use 1 to enable it)
AmdMsrTweaker NB_P0=8@1.3 NB_P1=@1.1 NB_low=3
=> modifies the NorthBridge P0 state (multi=8 (multis only supported by Bulldozer), VID=1.3V), its P1 state (VID=1.1V) and uses NB_P0 for all P-states < 3 and NB_P1 for all P-states >= 3
You can combine all parameters above

Do note that from version 1.1 onwards, different voltage steps are supported.
The voltage step supported on your platform is indicated on the info output.


下载地址
http://www.vdisk.cn/down/index/13080912